show network available-app-interfaces

This command displays all defined VRF and IP address source network interfaces, including their alias names.

Syntax

show network available-app-interfaces

Command Mode

Basic and Privileged User

Related Command

To configure aliases, use the alias command (see alias).

Note

If no IP route has been configured, the 'Source Address' column displays "None" in the output of this command.

Example

The example below shows the "SIP" application bound to the main VRF, the source IP address is the GigabitEthernet 0/0 interface (10.10.10.1), and the destination is IP address 11.11.11.100.